12
ASUS AP5000 Installation Guide
SLOT CARD
The ASUS slot card is DA-BC68 which uses for wide SCSI. Its jumpers and
connectors are shown on Fig:2-7. It will setup with Hot-Swap drive bay.
II. BARE-BONE KITS
II. BARE-BONE KITS
Fig 2-7: Jumper & Connector of Slot Card
Table 2-1: Jumper of Slot Card with SAF-TE Back Plane Board
KEY
SLED
PLED
ALED_IN
SCSI_ID
SCSI Connector
Golden Finger
Power Cable
Items
Functions
Cables Uses
Connect To
Golden Finger
Bus of Slot Card
None
DA-BP4-1S
Power Cable
Power of SCSI drive
None
SCSI drive
SCSI connector
Connector of wide SCS I
DA-BP4-1S
SCSI ID could be managed
from DA-BP4-1(S), refer to
Fig: 3-28
SCSI_ID cable, 8-
wire,
68-pin wide SCSI
cable
PLED (3-pin)
Power LED
SCSI_ID
(8-pin)
ID jumper of
SCSI drive.
*Be sure the
target SCSI ID is
in the right order.
Jumper of device accessing
ALED_IN cable, 2-
wire, (Red/Black)
Access jumper of
SCSI drive
ALED_IN
(2-pin)
PLED cable, 3-wire,
(Orange/Black/
Green)
SLED (3-pin)
Status LED
Light-1 of Drive
Bay
SLED cable, 3-wire,
(Green/Black/Red)
Light-2 of Drive
Bay
KEY (2-pin)
Insure the SCSI drive power
has been off while Key Lock of
Drive Bay being opened. To
protect device during hot-
swap.
KEY cable, 2-wire,
(Black/Red)
Key Lock of Drive
Bay
