ASUS 4-Port Wireless Ethernet Router
User Manual
46
Version 1.0
Document #: BD-AU0014-10
Advanced
Advanced features of the wireless LAN interface can be
configured in this section.
Settings can be configured for the following—
•
AP Isolation—if you select enable, then each of your
wireless clients will not be able to communicate with each
other.
•
Band—a default setting at 2.4GHz – 802.11g
•
Channel-- 802.11b and 802.11g use channels to limit
interference from other devices. If you are experiencing
interference with another 2.4Ghz device such as a baby
monitor, security alarm, or cordless phone, then change the
channel on your router.
•
Multicast Rate—the rate at which a message is sent to a
specified group of recipients.
•
Basic Rate—the set of data transfer rates that all the
stations will be capable of using to receive frames from a
wireless medium.
•
Fragmentation Threshold—used to fragment packets which
help improve performance in the presence of radio
frequency (RF) interference.
•
RTS Threshold (Request to Send Threshold)—determines
the packet size of a transmission through the use of the
router to help control traffic flow.
•
DTIM Interval—sets the Wake-up interval for clients in
power-saving mode.
•
Beacon Interval—a packet of information that is sent from a
connected device to all other devices where it announces
its availability and readiness. A beacon interval is a period
of time (sent with the beacon) before sending the beacon
again. The beacon interval may be adjusted in milliseconds
(ms).
