Asus AM604G - Wireless Router User Manual Download

Page: 5 / 59

Front Panel View

LED

Mode

Indication

Solid

Wireless is enabled.

No light

Wireless is disabled.

Blinking

There is wireless traffic.

Solid

ADSL is connected.

No light

ADSL is not connected. The ALARM led
will be red.

XDSL Link

Blinking

The router is connected to ADSL.

Solid

ADSL is connected, and there is no ADSL
traffic.

No light

ADSL is not connected.

XDSL ACT

Quick blinking

There is ADSL traffic.

Solid

Router is connected to the LAN.

No light

No connection to the LAN. Check if the
LAN cable is connected to the router.

LAN1-LAN4

Blinking LAN

traffic

Solid (red)

ADSL is not connected.

! (Alarm)

No light

ADSL is connected.

Solid

Router is powered on.

POWER

No light

Router is not powered. Check if the router
is plugged in and if the power switch is
turned on.

ASUS 4-Port Wireless Ethernet Router
User Manual

Version 1.0

Document #: BD-AU0014-10

Summary of Contents for AM604G - Wireless Router




























































Search results

Summary of Contents for AM604G - Wireless Router

Reviews:

Related manuals for AM604G - Wireless Router

Brands by name

Popular brands

Asus AM604G - Wireless Router, User Manual

Search results

Summary of Contents for AM604G - Wireless Router

Reviews:

Related manuals for AM604G - Wireless Router

Brands by name

Popular brands