Packet Filtering
This page allows you to permit or deny network traffic based on
the data source, destination, service or protocol of the data
packets. To set a filter, make sure that
Enable Packet Filter
is
checked and then click on
Add
to proceed.
Then you will continue to the below screen which allows you to
enter the rule by which you wish to filter incoming data packets.
Select from the following protocols—
•
TCP (Transmission Control Protocol)
•
UDP (User Datagram Protocol)
________________________________________________________________________
ASUS 4-Port Ethernet
28
Wi-Fi Router (AAM6X20VI-F1)
User Manual
Version 1.2
Document #: BD-AU0011-12
