-
21
-
Next go to the DNS Configuration and make sure that DNS
is enabled and you have entered a host name (this can be
anything you want!).
That’s all you should have to do! To test operation just
reboot your client and then check winipcfg; you should find
sensible IP settings (see previous section).
Scroll down the list of network settings until you find the
entry showing TCP/IP. Select it and then click on
Properties:
Tick on “Obtain an IP address automatically”
and “Obtain DSN server address automatically”. Finally
click OK, OK, Close to save the settings.
That’s all you should have to do! To test operation just
reboot your client (you shouldn’t have to reboot but I have
sometimes found it necessary to get W2K to request the
new settings from the server) and then in ipconfig you
should find sensible IP settings (see previous section).
