manualshive.com logo in svg

Asus A7N8X-VM 400, User Manual, Page: 54 / 64

Share
Download
Asus A7N8X-VM 400 User Manual Download Page 54

2-22

Chapter 2: BIOS information

Full Screen Logo [Enabled]

When [Enabled], MyLogo is displayed instead of the POST messages. Setting to
[Disabled] displays the normal POST messages. Configuration options: [Disabled]
[Enabled]

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for the option ROM.
Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Selects the power-on state for the NumLock key.
Configuration options: [On] [Off]

Wait for ‘F1’ If Error [Enabled]

Sets whether to wait for F1 key to be pressed if an error occurs.
Configuration options: [Enabled [Disabled]]

Hit ‘Del’ Message Display [Enabled]

Toggles the display of “Press DEL to run Setup”.
Configuration options: [Enabled] [Disabled]

Interrupt 19 Capture [Disabled]

When [Enabled], it allows option ROMs to trap interrupt 19. This is required by
some PCI cards that provide a ROM based setup utility.
Configuration options: [Disabled] [Enabled]

Make sure that the Full Screen Logo item is set to [Enabled] if you
want to use the ASUS MyLogo2 feature.

Summary of Contents for A7N8X-VM 400

































































Reviews:

No comments