manualshive.com logo in svg

Asus A7N8X-VM 400, User Manual, Page: 46 / 64

Share
Download
Asus A7N8X-VM 400 User Manual Download Page 46

2-14

Chapter 2: BIOS information

MDA Access Control [AGP]

Selects the MDA Access cycles direction.
Configuration options: [AGP] [PCI]

Primary Video [PCI]

This option switches the PCI Bus scanning order while searching for a video card.
This allows the user to select the type of Primary VGA in case of multiple video
controllers. Configuration options: [PCI] [AGP/Onboard]

Onboard TV-out format [PAL]

Allows you to set the onboard TV-out standard.
Configuration options: [PAL] [NTSC]

2.4.2 Onboard Devices Configuration

Onboard Floppy Controller [Enabled]

Allows you to enable or disable the onboard floppy controller.
Configuration options: [Enabled] [Disabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to set the address for the onboard serial port (COM1).
Configuration options: [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Serial Port2 Address [2F8/IRQ3]

Allows you to set the address for the onboard serial connector (COM2) connector.
Configuration options: [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Summary of Contents for A7N8X-VM 400

































































Reviews:

No comments