Asus A7N266-C User Manual Download Page 49

Page: 49 / 102

ASUS A7N266-C User’s Manual

4. BIOS SETUP

4. BIOS SETUP

4.1.2 Updating BIOS Procedures

1. Download an updated ASUS BIOS file from the Internet (WWW or

FTP) (see ASUS CONTACT INFORMATION on page 3 for details)
and save to the boot floppy disk you created earlier.

2. Boot from the floppy disk.
3. At the “A:\” prompt, type AFLASH and then press <Enter>.
4. At the Main Menu, type 2 then press <Enter>. The Update BIOS

Including Boot Block and ESCD screen appears.

5. Type the filename of your new BIOS and the path, for example, A:\XXX-

XX.XXX, then press <Enter>.
NOTE: To cancel this operation, press <Enter>.

6. When prompted to confirm the BIOS update, press Y to start the update.

Updating BIOS

WARNING!

Update the BIOS only if you have problems with the motherboard

and you know that the new BIOS revision will solve your problems. Careless
updating can result in your motherboard having more problems!

Summary of Contents for A7N266-C







































































































Search results

Summary of Contents for A7N266-C

Reviews:

Related manuals for A7N266-C

Brands by name

Popular brands

Asus A7N266-C, User Manual

Search results

Summary of Contents for A7N266-C

Reviews:

Related manuals for A7N266-C

Brands by name

Popular brands