Asus A7N266-C User Manual Download Page 27

Page: 27 / 102

ASUS A7N266-C User’s Manual

3. HARDWARE SETUP

3.7 Expansion Cards

In the future, you may need to install expansion cards. The motherboard has five
PCI expansion slots to support these cards. Follow the steps in the next section
when installing expansion cards.

WARNING!

Unplug the system power cord when adding or removing expansion

cards or other system components. Failure to do so may cause severe damage to
both the motherboard and expansion cards.

3.7.1 Installing an Expansion Card

1. Read the documentation that comes with the expansion card and make any

necessary hardware settings for the card before installing it.

2. Remove the system unit cover and the bracket plate on the slot you intend to use.

Keep the screw for later use.

3. Align the card connectors with the slot and press firmly until the card fits in

place.

4. Secure the card to the slot with the screw you removed earlier.
5. Replace the system cover.
6. Change the necessary BIOS settings, if any.

(see section 4.4.3 PCI Configuration to change the settings.)

7. Install the necessary software drivers for the expansion card.

Summary of Contents for A7N266-C







































































































Search results

Summary of Contents for A7N266-C

Reviews:

Related manuals for A7N266-C

Brands by name

Popular brands

Asus A7N266-C, User Manual

Search results

Summary of Contents for A7N266-C

Reviews:

Related manuals for A7N266-C

Brands by name

Popular brands