background image

22

© 2017 Directed. All rights reserved.

Use of this product in a manner contrary to its intended mode of operation may result 

in property damage, personal injury, or death. (1) Never remotely start the vehicle with 

the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. 

The user must also have the neutral safety feature of the vehicle periodically checked, 

wherein the vehicle must not remotely start while the car is in gear. This testing should be 

performed by an authorized AstroStart dealer in accordance with the Safety Check outlined 

in the product installation guide. If the vehicle starts in gear, cease remote start operation 

immediately and consult with the authorized AstroStart dealer to fix the problem.

After the remote start module has been installed, contact your authorized dealer to have him 

or her test the remote start module by performing the Safety Check outlined in the product 

installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit 

test, the remote start unit has not been properly installed. The remote start module must be 

removed or the installer must properly reinstall the remote start system so that the vehicle 

does not start in gear. All installations must be performed by an authorized AstroStart 

dealer. 

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS 

CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE START 

SYSTEM UNDER THESE CONDITIONS MAY CAUSE THE VEHICLE TO UNEXPECTEDLY 

LUNGE FORWARD RESULTING IN PROPERTY DAMAGE OR SERIOUS PERSONAL INJURY 

INCLUDING DEATH. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND 

SEEK THE ASSISTANCE OF AN AUTHORIZED ASTROSTART DEALER TO REPAIR OR 

DISCONNECT THE INSTALLED REMOTE START MODULE. ASTROSTART WILL NOT BE 

HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected vehicles only. Use of this product in a standard 

transmission vehicle must be in strict accordance with this guide.

This product should not be installed in any convertible vehicles, soft or hard top with a 

manual transmission. Installation in such vehicles may pose certain risk.

Interference

All radio devices are subject to interference which could affect proper performance.

Upgrades

Any upgrades to this product must be performed by an authorized AstroStart dealer. Do not 

attempt to perform any unauthorized modifications to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please take care to keep 

this product dry and away from heat sources. Any damage from water or heat will void 

the warranty.

Summary of Contents for DSP611


























Reviews: