Astronics OMNIBUS II NI PXIe, User Manual

Page: 18 / 67

INSTALLATION
OmniBus II NI PXIe User Manual 2-3
device and the computer. If the program does not detect any faults, it displays a
passed test message.
This program is installed automatically with the Avionics Instrument Driver
library. It can be found at the start menu:
Astronics Ballard Technology >
LabVIEW Instrument Driver > BTITST32
Note: You can use the Windows test program at any time to determine or
reassign the card number.
If you need further assistance, contact Customer Support (see Section 1.5).
2.4 Step 4: Connect to Databus(s) I/O
Connect the databuses to the PXIe card according to the pin assignment tables in
Chapter 7. Follow the coupling and termination guidelines discussed in Appendix
A: Coupling and Termination.
Connection of the ground pin(s) to the end system(s) is necessary for proper
operation of ARINC 429 and the Discrete I/O, and is recommended for MIL-STD-
1553. There is no need to terminate unused signals, and do not connect the reserved
pin(s).