ASTRO VG-884, Instruction Manual

Page: 53 / 389

Chapter 3 Selecting and Editing Timing Data
37
3.2.4 Scanning modes
The table below lists the V-Timing scan settings, the operations for the scanning methods supported by the settings, the
imaging methods, and the action settings.
Scan mode System Pixel imaging Scroll and other actions
Progressive Progressive
scanning Different pixels are drawn on
each line.
Operation is performed for
each frame.
Interlace Interlaced
scanning
Different pixels are drawn in the
first and second fields. Operation is performed for
each field.
Prog.Segmented
Frame Interlaced
scanning
Different pixels are drawn in the
first and second fields. Operation is performed for
each frame (2 fields).
Interlace (Sync) Interlaced
scanning The same image is repeatedly
drawn in the first and second
fields.
Operation is performed for
each field.
3.2.5 TV modes
This parameter indicates the output of the standard TV signals (NTSC, NTSC-M, NTSC-443, PAL, PAL-M, PAL-Nc,
HDTV1080 or HDTV 720).
Even when this parameter is changed, the timing data and other data will not be edited. Therefore, when changed, it is not
possible for images to be drawn correctly on the monitor.
* When editing the sample timing data using a TV Mode setting other than “Other”, select “Other” as the TV mode setting. In
this case, however, the tri-level sync signal will not be output.