ASTRO VG-884, Instruction Manual

Page: 279 / 389

Chapter 8 VG-884 System Settings
263
8.1.13 Operation mode at power-on
The program to be executed immediately after turning on the power of the VG-884 can be set.
①
Select Configuration using
MENU
or
INC
DEC
, and then press
SET
.
②
Select General using or
INC
DEC
,
and then press
SET
.
③
Select Power-On-Program using or
INC DEC
, and then press
SET
.
④
Select the setting using or
INC
DEC
, and then press
SET
.
Alternatively:
Select the setting using
0/STATUS
to
9/F
(number keys), and then press
SET
.
Reference
None
（ not execute ）：
The program is not executed when the
generator’s power is turned on.
Configuration
：
The program which was set in step
⑤
is
executed.
Last Memory
：
The Last Memory operation (the program which
was executed immediately before the generator’s
power was turned off) is executed.
However, some restrictions apply. Refer to notes
below.
⑤
When Configuration has been selected
Select the setting using or
INC
DEC
, and then press
SET
.
Alternatively:
Select the setting using
0/STATUS
to
9/F
(number keys), and then press
SET
.
Select the type of data for Type.
Type
SAMPLE TIM/PAT
：
Internal sample data (timing or pattern data)
USER Program ：
Program data created and registered by the
user.
Group
：
Group data created and registered by the
user.
* Last Memory restrictions
1. The user program will be executed in cases where the data types differ, such as when internal sample data is
selected as the timing data and a user program is selected as the pattern data.
(Example: When TIM=1001 and PAT=1, then TIM=PAT=1 is executed.)
2. The timing data number will be executed in cases where user programs are selected as both the timing data and
pattern data but their numbers differs.