manualshive.com logo in svg

ASTRO VG-870B, Instruction Manual

Share
Download
ASTRO VG-870B Instruction Manual Download Page 204

 

 

186 

 

<DP unit setting parameters> 

This sets On or Off for each channel. 
The same settings as the ones described in “4.1.1 Setting the output 
interfaces to ON or OFF” can also be established. 
0 

OFF 

No output. 

(1) 

Output 1ch (0/1) 
Output 2ch (0/1) 

1 

ON 

Output. 

Set Embedded Audio output. 
* Refer to “4.12.5    Embedded Audio” about its setting. 
0 

OFF 

Embedded audio is not output. 

(2) 

Audio Output (0/1) 

1 

ON 

Embedded audio is output. 

This sets the drawing mode. 
For further details, refer to “b) Concerning the drawing mode” in this section.
0 

Single 

Output in Single mode. 

1 

Dual 

Output in Dual mode. 

(3) 

Mode (0-2) 

2 

Split 

Output in Split mode. 
Note) the function is different between 
VM-1820(A) and VM-1826.    Refer to “(b) 
Concerning drawing mode” in this section for 
details. 

This selects screen split mode for 4Kx2K timing. 
This item is available only for VM-1826. 
0 

Horizontally 

Horizontally split into 2. 

(4) 

Split (0/1) 

1 

Vertically 

Vertically split into 2. 

This sets the color space of the video output from DisplayPort. 

*  When the YCbCr4:2:2 format has been selected, it is not possible to 

display the gray scale which has been set. Use this parameter to 
check the Main Stream Attribute parameters only. 

0 

RGB 

The video is output using RGB signals. 

1 

YCbCr4:4:4 

The video is output using YCbCr4:4:4 signals. 

(5) 

Video Format (0-2) 

2 

YCbCr4:2:2 

The video is output using YCbCr4:2:2 signals. 

This sets the bit length of the output video. A setting independent of the bit 
length for pattern drawing can be selected, or the same bit length can be 
selected automatically. 
*  The portion of the bit length for pattern drawing exceeds the bit length set 

here is discarded. Any deficient portion is filled with zeros. 

Refer to “4.1.5 Setting the bit length (gray scale) for pattern drawing” 
*  The bit length setting differs according to the video format. For further 

details, refer to “c) Concerning the bit length setting” in this section. 

*  For further details on the bit length to be output, refer to “c) Concerning 

the bit length setting” in this section. 

0 

Auto 

6, 8, 10 or 12 bits are selected here 
automatically depending on the bit length for 
pattern drawing. 

1 

6bit 

6-bit output 

2 

8bit 

8-bit output 

3 

10bit 

10-bit output 

(6) 

Width (0-4) 

4 

12bit 

12-bit output 
Note: this item can be selected in case of Video 
Format = 2 (YCbCr4:2:2).    Refer to “c) About bit 
length” for details. 

This selects the Main Stream Attribute “YCbCr Colorimetry”. 
*  This sets only the Main Stream Attribute. To change the color difference 

coefficient setting, refer to “4.1.6 Selecting RGB or YPbPr and setting the 
color difference coefficients”. 

0 

ITU601 

This sets ITU-R BT601. 

(7) 

Colorimetry (0/1) 

1 

ITU709 

This sets ITU-R BT709. 

This selects the Link Rate and Number of Lane setting method. 

(8) 

Link Set Mode (0/1) 

0 

Auto 

Output accords with the DPCD of the sink 
component. 

Summary of Contents for VG-870B




































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands