manualshive.com logo in svg

ASTRO VG-870B, Instruction Manual

Share
Download
ASTRO VG-870B Instruction Manual Download Page 19

 

1 

 

1

1

 

 

CONCERNING THE 
VG-870B/871B/873/874 

 

 1.1  General 

description 

 

The VG-870B/871B/873/874 video signal generator supports applications in every field of display test 
and measuring. 

It features a high level of expandability which is achieved by the installing video output interface units. 

 

 1.2  Features 

 

  16-bit high-speed imaging engine 

This generator features a maximum 16-bit × RGB high-gradation imaging engine. It even draws full 
HD images in an instant. 

  Wide dot clock frequency range 

The VG-870B/873 support dot clock frequencies up to 340 MHz. The VG-871B/874 support a 
maximum dot clock frequency of 250 MHz for analog outputs and a maximum dot clock frequency 
of 340 MHz for digital outputs. 

  Windows-compatible editing and registration software (SP-8870) provided 

as standard accessory 

This software can be used to edit and register the program data and exercise control over the 
signals output from the PC connected to the RS-232C/LAN/USB connector. 

  Full variety of sample data incorporated inside 

A total of a thousand types of timing data and a thousand types of pattern data are registered 
inside the VG-870B/871B/873/874 as sample data. They are categorized by standard, application 
and other factors, and it is possible for the data required to be selected easily. 

  Registration of program data on PC cards 

A total of a thousand program data can be registered on a PC card. PC screens or natural images 
can also be registered. On a PC equipped with a PC card slot, the data can be copied using 
Explorer provided with Windows 98SE, Windows 2000 or Windows XP. 

  Creation of user option patterns 

In addition to the existing basic patterns (including character, crosshatch, color bar and gray scale) 
and optional patterns, a function that allows users to create their own optional patterns has been 
added. This function makes it possible to create the optional patterns which are useful for 
developing and evaluating the next-generation displays. 

  Selection and installation of up to three video units possible 

In line with the operating environment, users can select up to three kinds of video units from the six 
kinds of output units available. In addition, a multiple number of video units of the same kind can 
be installed, and ASTRODESIGN also provides units which are customized to the needs of the 
users. 

  Output of uncompressed movies 

10-bit uncompressed movies can be output from the output unit which the user has selected. 

 

*  When output units are to be added or replaced, please contact 

ASTRODESIGN. 

 

Summary of Contents for VG-870B




































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands