
Chapter 6 Compliance Test
257
3C -15
Regular Procedure
– Receiver disconnect
after ks
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and the
repeater is disconnected and connected and
authentication is performed again after sending
SKE_Send_Eks.
3C -16
Irregular Procedure
– Timeout of Receiver ID
list
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and
Receiver ID List is not sent from the repeater to the
DUT.
3C -17
Irregular Procedure
– Verify V’
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and an
invalid V’ is sent from the repeater to the DUT.
3C -18
Irregular Procedure
– Device_Count
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and
Device_Count = 31 is sent from the repeater to the
DUT.
3C -19
Irregular Procedure
– DEPTH
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and
DEPTH = 4 is sent from the repeater to the DUT.
3C -20
Irregular Procedure
–
MAX_DEVS_EXCEEDED
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and
RepeaterAuth_Send_ReceiverID with the
MAX_DEVS_EXCEEDED bit set is sent from the
repeater to the DUT.
3C -21
Irregular Procedure
–
MAX_CASCADE_EXCEEDED
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and
RepeaterAuth_Send_ReceiverID_List with the
MAX_CASCADE_EXCEEDED bit set is sent from the
repeater to the DUT.
3C -22
Regular Procedure
– Repeater with zero
downstream device
Performs a check of the HDCP protocol when nothing
is connected to an output and a source device is
connected to an input of the DUT.
3C -23
Regular Procedure
– Propagation of
HDCP_2_0_REPEATER_DWONSTREAM
flag
Performs a check of the HDCP protocol when a
repeater is connected to an output and a source
device is connected to an input of the DUT, and
RepeaterAuth_Send_ReceiverID_List with
HDCP_2_0_REPEATER_DWONSTREAM set is sent
from the repeater to the DUT.
Summary of Contents for VA-1842
