background image

 

1.  Before operation 

1.1 Foreword 

Thank you very much for purchasing this model VA-1809 video signal generator.    This 
manual contains details on the operation procedures to be followed when the VA-1809 is 
used, the checkpoints and precautions to be observed, and other useful information.  
Refer to its instructions when using the generator. 

Ensure that the manual is kept in a safe place where it can be referred to at any time.   

 

1.2 Safety 

precautions 

Improper handling may result in malfunctioning.    Before using the VA-1809, please read 
through these instructions to ensure that you will operate the generator correctly. 

  Meaning of symbols used in the manual 

 

 

WARNING 

 

This indicates the possibility of grave bodily harm (including death or 
serious injury) and/or loss of the generator's original functions as a 
result of operating the generator incorrectly. 

 

 

CAUTION

 

This indicates the possibility of bodily harm, loss of the generator's 
original functions and/or damage to property as a result of operating the 
generator incorrectly. 

 

 

 

This indicates an action which is prohibited.    Specific details are 
indicated by a picture or text near 

 

 

 

 

This indicates an action which is mandatory or whose execution must 
be instructed.    Specific details are indicated by a picture or text near 

 

 

  To ensure safe operation   

 

 

Always take hold of the molded part of the plug when 
disconnecting the power cord. 

 

 

 

Do not use force to bend the power cord or bunch it up for 
use.    This may cause a fire. 

 

 

Do not place heavy objects on top of the power cord.    This 
may damage the cord, causing a fire or electrical shock. 

 

 

 

WARNING

 

Do not spill liquids inside the generator or drop 
inflammable objects or metal parts into it.    Operating the 
generator under these conditions may cause a fire, electric 
shocks and/or malfunctioning. 

 

 

Install the generator in a stable location.    Do not stand it on 
one of its side panels.    Doing so may generate heat, 
causing the inside temperature to rise and possibly resulting 
in trouble. 

 

 

 

CAUTION

 

Do not subject the generator to impact.    Doing so may 
possibly result in trouble.    Take special care when moving 
the generator. 

 

 

 

1

Summary of Contents for VA-1809





































Reviews: