Single cards
Plug in the card. Connect the tuner connection cable to
the corresponding
output A
of the SAT VMS 616 distri-
bution board (e.g. 1 A).
5.2
Cards with SAT tuner (SAT VSF 8 distribution board)
First, through exact program and output channel planning,
determine which satellite signal is required for the pro-
grams to be implemented and
thereby the number of required
connections for each satellite and
polarization.
If
necessary,
connect VSF 8 by means of a
loop through output (Fig. 10).
Ensure that all tuners (A and B) of
the plug-in cards to be installed
have a separate connection cable
(Fig. 11).
Remove any present loop through
cables or distributor cables and
install the supplied cable.
5
Installing plug-in cards
5
Installing plug-in cards
9
Plug in the card. Connect the tuner A connection cable to
an available output of the SAT VSF 8 distribution board
that carries the required polarization.
Twin cards
Proceed correspondingly with the connection cable from
tuner B.
5.3
Cards for terrestrial conversion
Because the SAT VMS 616 distribution board is suitable
exclusively for SAT intermediate frequencies (950-2150
MHz), the inputs from terrestrial cards (e.g. X-TU 860,
X-FM twin, X-FM amplifiers or X-DVB-T/Pal) must be fed
in via external inputs.
Remove the nut screwed onto the connection cable and remo-
ve the washer. Plug in the card. Remove the plastic cover of
the required external input. Install the F-connector of the
connection cable in the required external input hole (Fig. 12)
5.4
(De-) Modulator cards
Install the D-sub connectors supplied with the card in the
provided feedthroughs (Fig. 13) after previously breaking
out the pre-punched metal covers.
Fig. 11
Fig.13
Fig. 10
Fig12
