ASTRO SR-8450, Instruction Manual, Page: 32 / 65

Chapter 4 Operation from the remote controller
32
4.5.2 Register a clip
⚫
To register a clip, follow these steps:
➢
Here, as an example,
Suppose the clip is registered with the same Page, BANK, and clip numbers as in the example
shown in [4.5.1] .
Suppose you register clip 6 in BANK8 of Page 9.
1
Follow the instructions in
[4.5.1]
, and specify Page, BANK.
2
Press the 【 Goto In/IN 】 button at any frame to set the IN point of the clip.
➢
The
【
Goto In/IN button
】
lights up green.
3
Press the
【
Goto Out/OUT
】
button at any frame to set the OUT point of the clip.
➢
The
【
Goto Out/OUT
】
button will light up green.