ASTRO HDQ 1, Operating Manual

Page: 15 / 32

Page 15
Starting operation
Operating Manual HDQ1 - Version 09-2019A
Starting operation
To start operation of the HDQ 1, you must connect the device to the
mains using the supplied power supply unit. You do so like this:

Insert the plug of the power supply unit into the power supply
socket of the device [12] (see left).

Connect the mains plug of the power supply unit to the mains.
If the operating status lamp [2] (see left, below) is glows continu-
ously the unit is ready for operation.
A
TTENTION
:
If the operating status light flashes or does
not light up, it may be that
- The power supply unit is defective
- The device is defective, or
- An inadmissible operation is present (e.g. operating error,
wrong power supply unit).
(See “Maintenance and repair” section)
N
OTE
:
The use of another power supply unit with a
different output voltage or polarity can lead to the destruction
of the device as well as to malfunctions and voids the
warranty!
2
11
12
2
1 2