ASTRO HDQ 1, Operating Manual

Page: 13 / 32

Page 13
Connecting
Operating Manual HDQ1 - Version 09-2019A
Connecting
P
REPARATION
:
To connect the HDQ 1 connectors proceed as follows:
A
UFGABE
1. Plug one F connector each into the input [10] and output [9]
jack (see left) of the device. Make sure that the coaxial cables
are laid with a sufficient bending radius.
2. Connect the ground terminal [8] of the HDQ 1.
3. Insert the plug of the HDMI cable into the HDMI socket [11] of
the HDQ 1.
4. Insert the plug of the second HDMI cable into the HDMI socket
of the device whose transport stream is to be processed by the
HDQ 1 (e.g. camera signal, DVD player).
R
ESULT
:
The device is now connected and you can start the configuration
(see next section “Configuration”).
A
TTENTION
:
If F-connectors are handled improperly
or carelessly, compliance with the EMC limit values cannot
always be ensured.
Figure 3 shows a connection example for the HDQ 1:
Figure 3: Connection example
2
8
9 10
2
9 10
11
12 V DC
HDMI
TV TV
Cam, DVD, IRD