ASTRO DM-3106, Instruction Manual

Page: 64 / 89

54
3.4.60 Setting the output audio channel
1. Press the AUDIO switch to select L_CH or R_CH.
2. Turn the adjustment dial to set the output channel.
3.4.61 Changing the color of the markers
1. Press the MENU switch.
2. Turn the adjustment dial to select DISPLAY SETTING , and press the ENT
switch.
3. Turn the adjustment dial to select Mark Color , and press the ENT switch.
4. Turn the adjustment dial to change the display color, and press the ENT
switch to enter the change.
3.4.62 Changing the color of the time code
1. Press the MENU switch.
2. Turn the adjustment dial to select DISPLAY SETTING , and press the ENT
switch.
3. Turn the adjustment dial to select TC Color , and press the ENT switch.
4. Turn the adjustment dial to change the display color, and press the ENT
switch to enter the change.
The audio channels are channels 1 through 16. The same channel can be
selected for the left and right channels (in which case monaural sound will
be output).
Each time the AUDIO switch is pressed, the switch setting changes in the
following sequence: Volume
→ L_CH → R_CH → exit adjustment.
To return the channel to the initial setting, hold down the adjustment dial.
NOTE
For the range of the display colors which can be selected, refer to “4.9
Settings when initialization is performed.”
NOTE
For the range of the display colors which can be selected, refer to “4.9
Settings when initialization is performed.” NOTE