ASTRO DM-3106, Instruction Manual

Page: 57 / 89

Chapter 3 OPERATION
47
3.4.44 Giving names to the input signals
1. Press the MENU switch.
2. Turn the adjustment dial to select INPUT CHANNEL ID , and press the ENT
switch.
3. Turn the adjustment dial to select the character to be changed, and press the
ENT switch.
4. Turn the adjustment dial to select the character to change to, and press the
ENT switch to enter it.
3.4.45 Displaying the color bars when no signals are input
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Color Bar , and press the ENT switch to
select ON or OFF.
Characters are changed one at a time. Upper-case and lower-case letters,
numerals and basic symbols listed below can be used for the names, and up
to 10 characters can be displayed.
List of usable characters
！ ” ＃ ＄ ％ ＆ ʼ （ ） ＊ ＋ ， − ． ／
０ １ ２ ３ ４ ５ ６ ７ ８ ９ ： ； ＜ ＝ ＞ ？
＠ Ａ Ｂ Ｃ Ｄ Ｅ Ｆ Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ Ｍ Ｎ Ｏ
Ｐ Ｑ Ｒ Ｓ Ｔ Ｕ Ｖ Ｗ Ｘ Ｙ Ｚ ［ ＼ ］ ＾ ＿
ʻ ａ ｂ ｃ ｄ ｅ ｆ ｇ ｈ ｉ ｊ ｋ ｌ ｍ ｎ ｏ
ｐ ｑ ｒ ｓ ｔ ｕ ｖ ｗ ｘ ｙ ｚ ｛ ｜ ｝ ~
NOTE
When the color bars are set to ON, the color bars generated internally can
be displayed when no signals are input. NOTE