Page 12
FRONT COVER ASSEMBLY REMOVAL
1.
Turn power “ON”.
2.
Set MODE Switch to
MANUAL
.
3.
Turn Speed Control Knob CLOCKWISE so Conveyor tapes move slowly.
4.
Press Set Up Switch momentarily.
5.
Wait until Upper Pull-Out Roller touches Lower Pull-Out Roller and turn power OFF.
6.
Unplug Feeder.
7.
Unscrew 4 thumbscrews (
2 on each side of Feeder
)
[#1, Fig. 13]
.
8.
Remove Front Cover Assembly
[#2, Fig. 13]
.
Figure 13
