Astro Machine Astrojet 2, Installation And Operating Manual

Page: 3 / 35

Section 1
Astrojet II High-Speed In-Line Inkjet Printer
Introduction
1
Section 1 - Introduction
This Section,
Introduction
, describes how this manual is arranged.
Section 2, Getting Acquainted introduces the Astrojet II and describes major controls,
indicators, and important areas with which the user or operator should be familiar.
Section 3, Installation and Setup describes and illustrates how to install and get the
Astrojet II ready for printing. This procedure is usually a one-time requirement.
Section 4,
Operating the Astrojet II
describes and illustrates how to set up and get the
Astrojet II to run a particular addressing job.
Section 5, Operator Maintenance shows how to replace inkjet cartridges, and how paper
jams may be quickly and safely cleared. Other problems such as no printing, poor print
quality, etc., are also covered. Included in this section are special tips and suggestions that
will help you increase efficiency and avoid problems.
The Appendix is where important but infrequently used information is presented. The
Appendices are arranged as follows:
Appendix A, Specifications , lists the more important Astrojet II characteristics,
e.g., electrical, physical, etc.
Appendix B, Setting Up Your Computer , provides some general information on
setting up either your personal or mainframe computer so that it is compatible with
the Astrojet II.
Appendix C, Optional Hardware and Software , as its name implies, presents a
brief list of other equipment which may be used to further enhance the operation of
the Astrojet II. They are available as options.