background image

Astria.US.com

127051-01D

14

Figure 22 - Damper and Air Kit Handle

OPERATION AND MAINTENANCE 

Continued

OUTSIDE AIR AND DAMPER HANDLE OPERATION

The damper handle, which opens and closes the damper blade, is 

located in upper front face of fireplace. Pushing handle into the left 

of keyway slot will free damper blade to automatically open. Pushing 

handle into the right will lock damper blade closed (see Figure 22).
Outside air kit handle is located at left hand side of fireplace (see 

Figure  22).  Pulling  handle  out  will  free  outside  air  door  to  open. 

Pushing handle in will lock door closed..

 WARNING: Risk of fire! Replace grate with IHP 

model 111100-01 only. This grate has been designed to 

keep the operation of your fireplace safe and efficient.

Figure 23 - Locating Access Cover Plate

LOCATING ACCESS COVER PLATE

Sheet metal cover plates located underneath front hearth refractory may 

have shifted or moved out of place while fireplace was in transit. These 

cover plates must be kept in the proper location prior to using the fireplace 

(See Figure 23). 

For further operating guidelines, instructions and warranty informa-

tion, please refer to your homeowner's guide or contact your dealer.

Access 

Panel

OPEN

 

CLOSE 

Damper 

Handle

Outside Air 

Kit Handle

Keyway 

Slot

Handle 

Retainer

REPLACEMENT PARTS

See Pages 15 to 17 for a complete replacement parts list. Use only 

parts supplied from the manufacturer.

Normally, all parts should be ordered through your IHP distributor 

or dealer. Parts will be shipped at prevailing prices at time of order.
When ordering repair parts, always give the following information:
1. The model number of the fireplace.

2. The serial number of the fireplace.

3. The part number.

4. The description of the part.

5. The quantity required.

6. The installation date of the fireplace.
If you encounter any problems or have any questions concerning the 

installation or application of this fireplace, please contact your dealer.

IHP

1508 Elm Hill Pike, Suite 108

Nashville, TN 37210

Visit us at Astria.US.com 

TECHNICAL SERVICE

You may have further questions about installation, operation, or 

troubleshooting. Please contact your IHP dealer for any questions 

or concerns. When contacting your dealer please have your model 

and serial numbers of your fireplace ready. You can also visit our 

web site at 

Astria.US.com

Summary of Contents for Tuscan42P2

























Reviews: