NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
INNOVATIVE HEARTH PRODUCTS • LINEAR GAS FIREPLACES • REQUIRED AND OPTIONAL ACCESSORIES
8
Install glass door assembly
1.
Hold the glass door assembly by the sides, and hook the
top edge to the fireplace. Then swing the bottom edge in
toward the fireplace (
Figure 22
).
NOTE:
Be careful not to damage the glass.
2.
Align the screw holes below the door assembly with
the holes in the fireplace, and secure using the (3)
provided screws.
Glass Door Assembly
Rating plate and lighting instructions
are attached to door bracket.
Figure 22: Installing the glass door assembly
Attach optional bezel
1.
Hook the bezel upper flange to the top edge of the glass
door assembly, and then swing the lower edge of the bezel
toward the door (
Figure 23
).
2.
Gently push the lower edge of the bezel to attach the bezel
lower flange to the lower edge of the glass door frame.
Bezel Upper
Flange
Bezel Lower
Flange
[CROSS-SECTION]
Glass Door
Assembly
Figure 23: Installing the optional bezel
Install baffle (provided with fireplace)
1.
With the baffle oriented as shown (
Figure 20
), slide the rear
tabs into the slots in the back panel.
2.
While sliding the tabs into the slots, engage the front lip of
the baffle under the spring clips in the firebox ceiling.
Baffle
Slots in
Back Panel
Spring Clip
Firebox Ceiling
Tabs
Figure 20: Installing the baffle
Clean porcelain panels (if applicable)
1.
If applicable, use non-ammoniated glass cleaner and a soft
rag to remove fingerprints and smudges from porcelain
panels and floors.
Install optional surround
1.
Attach the surround and secure it using the nine (9) screws
provided with the surround kit (
Figure 21
).
Figure 21: Installing optional surround
