Astria.us.com
900634-00B
15
Figure 24 - Installing Front Top Log
Installation
Continued
Figure 25 - Installing Back Top Log and Final Assembly
Figure 25A - Installing Back Top Log, Top View
Front Top Log
(D-024)
Rectangular
Peg
Right Split
Crossover
Log (D-022)
Middle Split Log
Right Split
Crossover
Log (D-022)
Back Top Log
(D-023 or D029)
Figure 23 - Installing Right Split Crossover Log
7. For SouthernComfort logs, find the front top log (D-024). See
Figure 24. The left end of this log has a square hole that fits over
a square peg that is on the top of the middle split log. The right
end of this log rests behind the knot on the top of the front right
log.
8. Find the back top log (SouthernComfort30A/B
or ShadyHollow30A/B
models: D-023
,
SouthernComfort36A/B or ShadyHollow36A/B
models: D-029).See Figures 25, and 25A. The left end of this log
has a round hole that fits over the round peg that is on the top of
the back left log. The right end of this log has a rectangular hole
that fits over the rectangular peg on the top of the right crossover
log.
Place Volcanic Stone around the base of the burner assembly on the
fireplace floor to simulate an ash bed. Do not place Volcanic Stone
or any other material on the burner.
6. Find the right split crossover log (D-022) The bottom of the log
has a rectangular stand off that fits in the slots on the right side
of the front right log and the middle split log. Place this log as
shown in Figure 23.
Right Split Crossover
Log (D-022)
Right Front Log
Square Peg
VOLCANIC STONE PLACEMENT
For ShadyHollow logs only, follow steps 9 and 10.
9. Install the small Left Top Log D080 as shown in Figure 25B by
mating the rectangular peg and notch.
10. Install the small Right Top Log D081 as shown in Figure 25B.
Figure 25B - Installing Small Left Hand And
Right Hand Logs
D-080
D-081
Front Top Left
Front Top
Right
