Astria.us.com
900704-00E
27
OPERATION
Continued
•
fl ame setting until the fl ame cycles off, then
back ON thermostatically; when the fl ame
cycles ON again, automatic fl ame adjustment
will resume. Automatic fl ame adjustment will
also resume if the operational mode is cycled
out of, then back into THERMOSTAT mode or
if the SET temperature is changed.
•
THERMOSTAT OFF LCD Displays:
• MODE Zone: THERMO and OFF is displayed
• ROOM TEMP Zone: Measured temperature
is displayed
• SET TEMP Zone: SET TEMP is displayed
• TIME/PROG Zone: Current day indicator and
current time is displayed
• FLAME Zone: Blank
•
THERMOSTAT ON LCD Displays:
• MODE Zone: THERMO and ON are displayed
• ROOM TEMP Zone: Measured temperature
is displayed
• SET TEMP Zone: SET TEMP is displayed
• TIME/PROG Zone: Current day indicator and
current time is displayed
• FLAME Zone: A Flame Icon and fl ame setting
level number is displayed
Thermostat Disable Feature
•
The Thermostat Mode (described above)
may be disabled for applications where a
thermostat is not allowed or undesirable.
When Thermostat Mode is Disabled:
• The Modes of operation will cycle between
MANUAL ON and MANUAL OFF (omitting
THERMO).
• Program Operation (described below) is
also disabled.
• The SET TEMP zone will be blank.
• The room temperature will still be measured
& displayed in the ROOM TEMP Zone.
• The TIME/PROG zone will continue to display
the Clock and Day of week, but none of the
icons associated with Program Mode will be
displayed.
•
To disable or re-enable the Thermostat, the
transmitter must be in MANUAL OFF Mode,
then touch and hold the SET TEMP Zone and
the DOWN Button
•
simultaneously for 10- seconds. The LCD
screen will go blank except either THERMO
and OFF or THERMO and ON will fl ash 3-times
(0.5-seconds OFF, 0.5-seconds ON) to indi-
cate the change has been made.
DAY AND TIME DISPLAY
•
The current day of week and time of day will
be continuously displayed in the TIME/PROG
Zone (except during Setup operations).
•
The day of week will be displayed as one of
the following: S, M, T, W, T, F, S
•
The time of day will be in 12-hour AM, 12-
hour PM format. Midnight will be displayed
as 12:00am.
•
Day/Time Setup:
1. Press and hold the MODE Zone for 5 seconds
to enter Day/Time Setup.
2. Touch the UP or DOWN Buttons to adjust the
day of week (press the MODE/SET Button or
wait for 15 seconds for adjustment to be ac-
cepted, then enter hour of day adjustment).
3. Press the UP or DOWN Buttons to adjust
the hour of the day. The time will advance in
1-hour increments; AM and PM will change
when the hour advances to 12:00 midnight
and 12:00 noon respectively (press the
MODE/SET Button or wait for 15 seconds for
adjustment to be accepted, then enter minute
of hour adjustment).
4. Press the UP or DOWN Buttons to adjust the
minute of the hour. The time will advance in
1-minute increments (press the MODE/SET
Button or wait for 15 seconds and the trans-
mitter will exit Day/Time Setup and return to
normal operation).
5. LCD Displays – when in Day/Time Setup:
• MODE Zone: Blank
• ROOM TEMP Zone: Blank
• SET TEMP Zone: Bank
• TIME/PROG Zone: Day of Week, or Time
of Day will Flash
• FLAME Zone: Blank
