PC: Evolve Columns Operating Manual v2
24
Reassembly of Evolve™ Process Columns
Note: Reassembly of the column is the reverse of disassembly.
Fixed Assembly
1.
Install the process flow tube into the back of the flow cell. Ensure the flow tube seal is located.
Tighten process flow tube using correct tools.
2.
Install the bed support/seal assembly on to the flow cell by carefully locating the bed support
seal onto the flow cell. The bed support should be fitted with the smooth side facing into the
column (see Figure 11).
3.
Fit all the process pipework and ensure all connections are secure but do not overtighten.
Figure 11 Diagram showing the location of the fixed bed support
Figure 12 Photograph showing the installation of the fixed bed support