OPTIMA / MAYA SERIES · HEAT PUMP AIR/WATER
© FLUIDRA 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
Pag: 42
ENGLISH
Install the chemical product dosifiers "downstream" from the heat pump, at a height lower than
the pump itself and always as far away from the pump as possible. Never in the suction pipe of
the water treatment pump, since this will damage the condenser.
NEVER place concentrated chemical products in the pool skimmers; this will damage the
titanium condenser.
In climates subject to sporadic freezing temperatures, the water can be circulated by the water
treatment pump to ensure that the water temperature remains above freezing (0ºC).
In the event of persistent freezing conditions, all the water treatment and heating system
components should be completely drained. Draining is performed by removing the drain plug
on the side of the condenser
FAN:
Verify the flows of the fan each year.
Clean the louvers of the fan as well as the protection grill regularly.
ELECTRICAL PANEL:
Check all electrical connections.
Verify that there is no over-heating of the electrical terminals.
Check that the safety systems are working correctly.
Verify that the thermostat or main control operates correctly and verify the temperature with a
mercury thermometer (probe calibration).
13.
WARRANTY AND GENERAL CONDITIONS
The manufacturer guarantees the quality of the equipment referred to in the LETTER OF
WARRANTY that should be delivered with this start-up and operation manual.
The manufacturer's warranty does not cover breakdowns or damage caused by the following
circumstances:
- Inadequate installation or use.
- Not following the cleaning and maintenance instructions.
- Inappropriate chemical conditions.
- Work performed by unauthorised personnel.
- Damage caused by inadequate watering.
- Damage caused by natural phenomena.
