background image

19

Astra P-7 USER MANUAL

The Idle display mode has the following options:

The display stays in the last selected menu section. In case the menu has been in the edit mode, the changes are 

discarded and the edit mode is exited.
The display exits the last selected menu section and cycles between a current room temperature and a clock. 

<-> 

The display exits the last selected menu section and moves to the Temperature menu. The actual measured room 
temperature is displayed on the screen. 
The display exits the last selected menu section and moves to the Time menu. The current time is indicated on 
the screen. 
Beeper volume setting enables the user to change the volume of the display signals from 1 to 5 or switch the 
beeper off.
The beeper is off.

The sound level is 1.

...

...
The sound level is 5.

The controller information menu subsection. Used for service purposes.

Version of the controller main board.

Version of the controller display.

The service menu subsection. Access for the authorized service personnel only.

The random 4-digit number combination is indicated on the screen.

To modify the setup options, press 

 button to enter the Setup menu section. The set idle display brightness value is displayed. 

To move between the setup options, press 

 buttons to display the settings. To change a setting, press   button and use 

 

buttons to increase/decrease the selected values. When finished, press   button to confirm the set value.

8. MAINTENANCE AND CLEANING

Regular cleaning is of crucial importance for the continued operation of the stove. Failure to follow the cleaning schedule, or the use 

of dirty fuel can clog the inner spaces of the stove. These impurities can hinder air supply to the combustion chamber and cause the 

stove to stop working. To prevent this outcome, it is highly recommended that the user perform the cleaning activities specifically as 
described in the following chapters.

• CLEANING SCHEDULE

Tasks/ Frequency

Daily

Once per 2-3 days

Once per 30 days Once per 60-90 days Once per season

Fire pot cleaning

o

Ashes drawer emptying

o

Door glass cleaning

o

Flame trap cleaning

o

Exchanger tubes scraping

o

Combustion chamber vacuuming

o

Pellet hopper vacuuming

o

Flue channels cleaning

o

Door gasket changing

o

Chimney cleaning

o

Summary of Contents for P-7





























Reviews: