manualshive.com logo in svg

Astra KA-700H, Operation Manual

Share
Download
Astra KA-700H Operation Manual Download Page 12

11

2) The Spring

• To replace the spring, it is best to remove the arm first.

Arm holder

Spring holder

Clip

Spring holder

Remove the clip by pulling it away. The 

spring holder can now be removed.

Use a Phillips screwdriver to remove 

the spring from the holder.

• Align the nipple on the inside of the spring holder with the corresponding concave part on the in-

side of the arm holder, and then install the arm holder. 

Insert the clip in the correct direction as 

shown in the image below, deeply enough to prevent falling out.

Arm holder

Concave

part of shaft

Clip

Spring holder

Protruding 

part of screw

3) Peeler blade

• When replacing the peeler blade it is easiest to first remove the arm from the unit.

The peeler blades are extremely sharp. Handle with care to 
avoid injuring your hands.

Warning!

Peeler replacement procedure

1.

2.

Loosen the roller screw.

Loosen the screw until the blade can be turned 360°.

3.

4.

Rotate the peeler to the shown direction.

Rotate the peeler so the hole cut of the arm matches 

the peeler, then remove it.

• When replacing the blade, make sure that of the unit’s orientation of the unit is the same, 

and then carry out the reverse the procedure.

• Please watch the instruction videos from our homepage.

Summary of Contents for KA-700H









































Reviews:

No comments

Brands by name

Popular brands

Load more brands