•
Measure 1200mm up from the floor along the centreline of the final position of the unit;
using
a
spirit level, draw a horizontal line either side of the centreline, at least 520mm long
•
Place the attachment rail with the open lip upwards,
with its holes centred
on the
horizontal
line.
Select two holes in the rail, at
least 250mm apart, to use for fixing, and mark the wall
through
these holes with a pencil
•
Using a 6mm
drill
bit, drill two full depth pilot holes at the marked positions and then
open
up
in
order to accept the
appropriate f
ixings
•
Fix the attachment rail onto the wall
with the open lip uppermost
, using two suitable fixings.
Ensure that the rail is
horizontal
using a level (adjust to suit) and check that it is secure
I
nstallation
Please Note: Due to the complexity of different building methods
Astor
-
Bannerman do not supply installation fixings and anchors.
Important: The attachment rail
is designed to only support the weight of the unit and
not the rated load of the sink, this is an installation aid only
Page:
6
Fig
5
Version
4
:
2
5
-0
9
-01
9
