Aston Global SEB976, Installation And Owner'S Manual, Page: 10 / 27

Mark the Top Rail Location
ATTENTION: A minimum of two people are required for the next assembly steps.
Preassembly the top rail (2) onto the fixed glass (3) to locate the mounting points
on the wall relative to your desired location.
Painters tape or masking tape in the general location of the of the final installation
will aid in marking the wall and floor.
1
..
---o-----1U1---o ---,
4-1
�___,.-----
1. Slide the door stoppers (1) onto each end of the the top rail (2). The bumpers
on door stoppers (1) should face inward and be on top for final installation.
See figure 1. Note: One door stopper comes pre-assembled on top rail
between fixed glass bolt assembly. See figure 1.
9