3. Insure plastic sliding door glide is in place in underside of sliding door track divider
(7) and positioned to proper location for 8mm glass thickness. See figure 3.
4. Position the sliding door track divider (7) into position as seen in figure 4 and mark
the 2 shower base hole positions.
Note: In drawing 4 the hole locations for
attaching sliding door track divider should be 113/16" from edge of fixed
glass. See details in figure 4.
NOTE: If your surface is prone to cracking or chipping then it is recommended
that you pilot drill first using a smaller drill bit, and then step up to the final
size.
5. Using the appropriate drill bit for your base surface drill hole locations with 5/16"
diameter drill bit and insert wall anchor into drilled holes. Position the sliding door
track divider (7) over drilled holes on shower base, and secure sliding door track
divider (7) to shower base using hardware in screw pack 2. See figure 5.
10
