Aston
®
Tire Changer ATC-5733 User’s Manual
26
www.astontechusa.com
MOUNTING TUBE TYPE TIRES
◇
Lubricate the beads and rim liberally.
◇
Position the Mount/Demount Head as described earlier. Mount the bottom bead first.
◇
Apply rubber lubricant to the tube. Insert the tube into the tire, paying careful attention
not to pinch the tube. Round out the tube with a small amount of air.
◇
Lower the Arm Rollers onto the tire as described earlier.
◇
Round out the tube with a small amount of air. Apply rubber lubricant to the tube.
◇
Depress the Table Top Pedal and rotate only a short distance at a time.
◇
Mount the top bead.
INFLATION
Review the following descriptions and diagrams carefully. Refer to them as necessary during
wheel restraint, bead sealing, bead seating, and inflation to verify that you are proceeding
properly and safely.
DO NOT FORCE THE TIRE ONTO THE RIM. BEAD DAMAGE COULD
RESULT MAKING THE TIRE UNSAFE AND/OR CREATING THE RISK OF
INJURY.
CHECK INFLATION GAUGE FOR PROPER OPERATION. ACCURATE PRESSURE
READINGS ARE IMPORTANT TO SAFE TIRE INFLATION. REFER TO THE
OPERATING MAINTENANCE SECTION OF THIS MANUAL FOR INSTRUCTIONS.
IF THE RIM HAS BEEN CLAMPED FROM THE OUTSIDE FOR TIRE MOUNT- ING,
RELEASE THE CLAMPS ONCE BEAD SEAL IS OBTAINED, LIFT THE TIRE, AND
MOVE THE CLAMPS TO THE CENTER OF THE TABLE TOP.
