Aston
®
Tire Changer ATC-5733 User’s Manual
19
www.astontechusa.com
4.2.2 Wheel Clamping
◇
Fixed the block in the Right helper arm in the center of
Press Wheels.
◇
Use the Wheel Clamp Foot Pedal to move the Clamps inward (pedal down) or outward
(pedal up).
4.2.3 Tire mounting
◇
Apply tire manufacturer’s approved rubber lubricant liberally to entire circumference
of both upper and lower beads after loosening bead and placing on table top.
◇
After the wheel is secured to the Turntable, s
et the vertical shaft in the working position
.
◇
Push the Vertical Shaft down and position the Mount/ Demount Head into contact with
the rim edge.
◇
Press the button on the locking handle to lock. As the slide is locked, the Mount/
Demount Head will move upward approximately 1/8 inch and backward 1/8 inch from
the rim edge. The Mount/Demount head roller should not be in contact with the rim edge.
◇
Place tire/wheel assembly on
Table Top with mounting side up.