13
Aston®
Overhead Two Post Lift AL-100RH User’s Manual
or lower the lift immediately. Turn off and padlock the
main switch. Contact qualified service personnel.
4.1 Preparations
Each support arm is provided with an automatic arm
restraint which unlatches automatically when the lift is in
bottom position.
When the carriages are in a raised position, the arm
restraint can be disengaged by pulling the release pin.
●
Fully lower the lift and swing the arms to full drive-
through position.
●
Turn the disk adapters that they evenly contact all four
lift points.
Once the disk adapters contact the lift points,
check arm restraints for engagement. If necessary,
slightly move the arms until the gear segments mesh.
Never unlatch the arm restraints when the lift is under
load.
●
Leave vehicle and remain clear of lift.
Always lift the vehicle using all four adapters.
4.2 Raising
During raising and lowering cycles: Closely
watch the vehicle and the lift, do not allow anyone to stay
in lift area and make sure the vehicle doors are closed.
Once the disk adapters contact the lift points, check arm
restraints for engagement. After raising the vehicle
briefly, stop and check adapters for secure contact.
●
Press button on power unit.
Lift stops once button is released or upward travel limit is
reached.
When vehicle is in raised position:
●
Observe all accident prevention regulations.
●
Do not allow unauthorized persons to stay under the
raised vehicle.
●
Avoid rocking of vehicle.
●
Keep lift free of tools, parts, etc.
●
Fasten the vehicle to the support arms using lashing
straps when removing or installing heavy components.
●
Slowly position vehicle midway between adapters.
Apply the parking brake.
●
Swing and telescope arms as required to position
adapters under vehicle manufacturer's recommended
lift points.
