ASTEL DT-1600 Manual Download Page 9

Page: 9 / 80

This DVR is divided 4ch, 8ch and 16ch by model.
In case of DT Series, it is Hybrid DVR which supports 4channel IP camera (SD/HD class).

The image of IP camera can be checked Live view, Playback and Backup on SMS software.

This DVR provide superior video image quality on Live view and Playback.

• Pentaplex Operation Performance (Live, Recording, Playback, Backup, Network)

• Up to maximum 16 channel composite input ports depending on model. (4/8/16)

• Support IP camera input. (DT series)

• Various Recording mode. (Manual / Schedule / Event)

• Various Search functions. (Date/Hour search, Calendar search, Event Search)

• Various Playback functions. (Normal / Fast / Slow / Step / Reverse / Smart / Panorama / Repeat)

• Overwrite Recording function.

• The DVR menu structure and on screen display is presented in a simple to use and logical GUI format.

• Support 16channel Audio. (Standard 4channel Audio)

• Support Mouse control.

• E-mail function (Alarm, Motion detection, Video loss, HDD fail end etc)

2. OUTLINE

2.1 Functions

Wednesday, February 29, 12

Summary of Contents for DT-1600

















































































Search results

Summary of Contents for DT-1600

Reviews:

Related manuals for DT-1600

Brands by name

Popular brands

ASTEL DT-1600, Manual

Search results

Summary of Contents for DT-1600

Reviews:

Related manuals for DT-1600

Brands by name

Popular brands