7
Multi-color (M) model
To control the mode of lighting the simple momentary-switch (not included) has to be used and
connected to the CONTROL wires by the 2-pole signal cable (not included).
Optional MXU01 interface can be connected to the CONTROL wires by using a 2-pole signal cable
(not included).
CONTROLS
Single-color white (W), blue (B) or green (G) models
Remote control can be used to turn-on and turn-off the underwater light and to control the luminosity.
Dimming
The dimming are enabled by using optional PWM dimmer MDU13.
DMX512 control
The network connection to control the lights with the standard DMX512 protocol is enabled by using
optional PWM dimmer MDU13 and optional MXU01interface.
Multi-color (M) model:
Remote control has to be used to turn-on and turn-off the underwater light and to control the mode of
lighting and luminosity.
The multi-color underwater light can be controlled by using the momentary-switch.
When the light is turned-off
the color or mode of lighting can be changed sequentially by pressing
the momentary switch for 2 seconds:
EQUATOR MSR36240P
Sequence of lighting
Custom Color
Full RGB
Cool White
Bluish White
Red
Green
Blue
Rainbow Color Spectrum
Turning on /off
Press the momentary-switch shortly.
Changing the color or mode of lighting
When the light is turned-off press the momentary-switch for 2 seconds.
Setting the Custom Color
At the selected Rainbow Color Spectrum mode press the momentary-switch shortly to turn the light
off. After that press the momentary-switch for 5 seconds or until the light is switched to the selected
color and then the Custom Color is set and selected.
