7
CONTROLS
Single-color cool white (W), warm white (WW), blue (B) or green (G) models
Remote control can be used to turn-on and turn-off the underwater pool light and to control the
luminosity.
Dimming
The dimming are enabled by using optional PWM dimmer LDU13.
DMX512 control
The network connection to control the lights with the standard DMX512 protocol is enabled by using
optional PWM dimmer LDU13 and optional LXU01 or LXU03 interfaces.
Multi-color (M) model:
Remote control has to be used to turn-on and turn-off the underwater pool light and to control the
mode of lighting and luminosity.
The multi-color underwater pool light can be controlled by using the momentary-switch.
When the light is turned-off
the color or mode of lighting can be changed sequentially by pressing
the momentary switch for 2 seconds:
METEOR LSR36500
Sequence of lighting
Custom Color
Full RGB
Cool White
Bluish White
Red
Green
Blue
Rainbow Color Spectrum
Turning on /off
Press the key-switch momentary.
Changing the color or mode of lighting
When the light is turned-off press the key-switch for 2 seconds.
Setting the Custom Color
At the selected Rainbow Color Spectrum mode press the key-switch momentary to turn the light off.
After that press the key switch for 5 seconds or until the light is switched to the selected color and
then the Custom Color is set and selected.
Dimming
When the light is turned-on press the key-switch until the desired illumination is achieved. By another
pressing of the key-switch the luminosity will increase to the maximum illumination.
Set default
Press the key switch for min. 40 seconds or until the light is turned off.
