ASTEK A33606-PCI-01, User Manual

Page: 8 / 26

A33606-PCI-01 SAS-2 Expander User Manual
8
Copyright © 2010 by Astek Corporation. All rights reserved Ver. B
Step 4. Attach the SAS HBA or RAID Card to the expander card.
For internal connection, connect the host to J5 using an SFF-8087 cable.
For external connection, connect the host to J2 using an SFF-8088 cable.
Step 5. Attach drives to the expander card. The mapping of drive number to connector is
shown below.
Connector Drive Numbers
J3 1-4
J4 5-8
J6 9-12
J7 13-16
J8 17-20
J9 21-24
Drives can be attached via a backplane by using an SFF-8087 cable.
Drives may also be attached using an SFF-8087 to SATA fanout cable.
Step 6. Power on the system.
A33606-PCI-01
The A33606-PCI-01 is intended to be installed directly to a chassis or PC case.
CAUTION
Ground yourself before removing any electronic equipment or parts.
J2
J5