Installation Procedures
Ver. B
Copyright © 2010 by Astek Corporation. All rights reserved
9
Step 1.
Remove the A33606-PCI-01 from the ESD packaging and check that it is not
damaged.
Step 2.
Insert the Expander card into the chassis. The mounting holes are sized to support
M3 or 4-40 hardware. Board dimensions and mounting hole locations are defined
in the Mechanical Specifications section.
Step 3.
Attach a 4-pin power cable from the power supply to J13 (shown below). The
A33606-PCI-01 utilizes 12V input power.
Step 4.
Attach the SAS HBA or RAID Card to the expander card.
For internal connection, connect the host to J5 using an SFF-8087 cable.
For external connection, connect the host to J2 using an SFF-8088 cable.
Step 5.
Attach drives to the expander card. The mapping of drive number to connector is
shown below.
Connector Drive Numbers
J3
1-4
J4
5-8
J6
9-12
J7
13-16
J8
17-20
J9
21-24
J2
J5
Summary of Contents for A33606-PCI-01
Page 1: ...A33606 PCI 01 SAS 2 Expander User Manual Version C Document Number 90 000186 ...
Page 3: ......
Page 14: ......