manualshive.com logo in svg

ASTEC RT130, Operator'S Manual, Page: 58 / 64

Share
Download
ASTEC RT130 Operator'S Manual Download Page 58

INDEX

AU106984  G7B

A2

T

Teeth .................................................................... 21

Throttle Control ...................................................... 15

Tire Air Pressure ..................................................... 26

Tire Service ............................................................ 26

Tire Tread Direction ................................................ 26

Tires ...................................................................... 25

Towing .................................................................. 23

Trailering ............................................................... 23

Transaxle

Fluid Change ...................................................... 36

Fluid Level  ......................................................... 36

Transport/Work Control  .......................................... 16

Transporting The Machine On A Trailer  .................... 23

Trench Depth, Maximum.......................................... 46

Trench Widths......................................................... 46

Trencher Boom  ................................................ 20, 45

Trencher Chain  ...................................................... 21

Trencher Operation  ................................................ 20

U

Utility Line Safety  .....................................................5

Utility Safety  ............................................................5

W

Walk-Around Inspection .......................................... 17

Weight, with 24” Boom and Chain ............................ 46

Wheel Base............................................................. 46

Width, Overall ......................................................... 46

Summary of Contents for RT130

































































Reviews:

No comments