AST Premmia GX Series, User Manual

Page: 56 / 88

56
Premmia GX Series
Changing the Processor{ XE "Processor" }{ XE "CPU" }{
XE "SEP" }{ XE "SECC" }{ XE "SECC2" }
The Intel® processor in your computer is installed into a 242-contact slot connector on
the motherboard. Processor modules are available in three packages:
•
the Single Edge Processor (S.E.P.) package
•
the Single Edge Contact Cartridge (S.E.C.C.)
•
the Single Edge Contact Cartridge 2 (S.E.C.C.2.).
Each module includes processor and the cache memories.
Removing the Processor
WARNING: The processor module and heatsink will be hot if the computer has been
running. To avoid personal injury, wait at least 10 minutes for the module and heatsink
to cool after turning off the computer.
1. Follow the instructions on page 38 to remove the system cover.
2. Remove any option cards that block access to the processor.
3. Pull back the retaining tabs from the ends of the processor socket and lift out the
processor and attached heatsink.
Processor
module
Tab