OPERATION
4-13
How to Edit a Profile
1. Go to the Profiles Page.
Move the cursor to Go to Profile (at the bottom of the
Main Page), then press
►
.
2. Choose to edit a profile.
Press
►
.
Main>Profile________
Create Profile
> Edit Profile
Delete Profile
3. Choose the profile you want to edit.
Press
►
.
…Edit Profile_______
> Profile1
Profile2
Profile3
4. Choose how you change the profile.
Choose whether you want to insert a new step, edit a
specific step or delete a step.
To edit a step:
• Select the number of the step you wish to edit from a list
of steps and step types.
• The next screen presents a list of all possible step types.
The cursor will be positioned on the current step type. To
keep it, press
►
and make your changes to the properties
listed on succeeding screens.
• If you choose to change a Step Type, the Series F4 will
prompt you to program all necessary parameters.
To insert a step:
Move the cursor to the number of the step that the new
step will precede. Press
►
. The Series F4 will prompt you
to program all necessary parameters of the new step.
Inserting a step changes the numbers of all steps that
follow.
To delete a step:
Move the cursor to the number of the step to be deleted.
Press
►
. Deleting a step changes the numbers of all steps
that follow. A Jump Step that jumps to an End Step
cannot be deleted.
Choose to:__________
Insert Step
> Edit Step
Delete Step
Edit Step:__________
> Step 1 Autostart
Step 2 Ramp Time
Step 3 Soak
Summary of Contents for SD-302
