KICKUP TO CHASSIS
Add screw locking compound such as #1596
Factory Team Locking Adhesive (not included
in kit) to the three #9215 screws and attach
the #9210 (9210B*) aluminum kickup (nose
plate) to the #7308 (7309*) chassis.
Place the two #9160 servo saver/bell crank
mounting pins in the locating holes.
9215, qty 3
6-32 x 3/16
step 1
9160, qty 1
mounting pin,
right hand
9160, qty 1
mounting pin,
left hand
SERVO SAVER
Push one #9155 servo saver
bushing into each end of the
#9158 (9156B*) aluminum
tube.
Slide the two #9155 servo
saver arms onto the tube.
Slide the #9157 spring and
#9158 (9156B*) adjusting nut
on the tube. Tighten the nut
until 1/32" of the tube threads
are exposed.
Add three #6270 ball ends
where shown and three
#6272 foam dust covers onto
them.
BELLCRANK
Install the two #9155
bushings (or 9162* bearings)
into the #9155 bell crank.
Add two #6270 ball ends
where shown and two #6272
foam dust covers onto them.
6270, qty 5
ball end
6272, qty 5
dust cover
9155, qty 2
left hand servo
saver bushing
9155, qty 1
servo saver arm
9155, qty 1
servo saver
arm
9158, 9156B*, qty 1
tube,
aluminum
9158, 9156B*, qty 1
adjusting nut
9157, qty 1
servo saver
spring
9155, qty 1
bell crank
9165, qty 1
drag link
DRAG LINK
Install the #9165 drag link
over the two ball ends with
your needlenose pliers.
1:1
1:1
1:1
1:1
1:1
1:1
1:1
9210, 9210B*, qty 1
kickup
TOOLS USED
step 2
5
step 3
REMOVE THESE
PARTS FOR:
Steps 1-3
9210,
9210B*
9160
9215
9160
9215
9215
6272
6272
6272
9155
9155
9158, 9156B*
9155
9155
9155,
9162*
9155, 9162*
9155
6270
6270
6270
6270
9158, 9156B*
9157
6272
9165
BAG B
9162*, qty 2
ball bearing
OR
9155, qty 2
bushing
1:1
7308,
7309*
RC Car Action
magazine's
Reader's Choice Award
RC Car Action's
Truck of the Year Award
Top Ten Reader's Choice Award
RC Car Action
magazine
RC Car Action
magazine's
Reader's Choice Award
