Assistant FREEDOM AP-72 G Series, User Manual

Page: 91 / 96

27
р
.
ENG
YOUR SUCCESS IS OUR CONCERN!
not provided constructively, it’s necessary to press and hold for 7-10 seconds);
t to reset to factory settings;
t to download an actual version of system software from the support section and to
install it into the device.
Solving of problems with sound replaying
1) The sound does not replay
t make sure that sound replaying is switched on in basic system settings;
t make sure that volume level is maximal (or necessary for You);
t volume is not enough. Adjust volume level in system settings;
t many of problems of sound replaying are caused by software. If there haven’t been
problems of sound replaying before, probably, its absence is caused by incorrect software
setting or settings of installed program. To solve such problems, contact the creator of
such software;
t check, if replayed file is not damaged. Try to replay another file from another directory.
2) Problems of sound recording
t make sure that the device microphone is turn to sound source;
t make sure that the record is at necessary volume level. Sound source power may be
not enough for clear record;
t make sure that software for sound-reproducing device is set correctly. Reinstall
software, if it’s necessary.
Problems with USB - devices working
t make sure that USB-device is operable;
t at using an external hard disk make sure that the disk is connected to a network and a
socket is operable.
Problems of microSD card working
1) A computer does not identify a card
t make sure that the card is put into a proper slot to the full stop;
t make sure that the card is put in by the right side;
t probably, the card is damaged. Try to check operability of the card on other device;
t try to remove or put in again microSD card, try to reboot the computer;
t read the manual about setting of such card.
2) Problems of files copying
t check, if connecting of the stationary computer/notebook and the tablet PC of TM
ASSISTANT was carried out correctly;
t probably, device memory is full, and it’s necessary to delete unused files;
t probably, the problem is caused by an application, by means of which You try to copy
files. Reinstall this application or use another one.
Problems of automatic changing of display orientation at computer turning
t make sure that this function is activated on the device. A proper option must be chosen
near the point «Setting» => «System» => «Special options» => «Display autoturning».