www.assfalg-metal.com
[19]
Assfalg GmbH Buchstraße 149 73525 Schwäbisch Gmünd / Germany +49 (0)7171 92505-0 Fax +49 (0)7171 92505-50
b)
After the charger self-check routine has finished (LEDs1/3 and LEDs2/4 will flash alternately),
carefully plug the charger in to the SAFEBAT charging point, making sure the connector is
correctly orientated.
c)
Once the battery has been detected, the LEDs indicate the current battery level and charging
begins.
d)
Once the battery has been fully charged (all four LEDs light), first disconnect the charger from the
AC mains socket and then from the SAFEBAT.
In case of fault, the four LEDs flash simultaneously. Disconnect the charger from the AC mains
socket and then from the SAFEBAT. Reconnect the charger as before. If charging is still not
working correctly, then contact Assfalg.
10.2
Charger features and safety notes
•
AC input voltage 100-240V, no transformer needed, worldwide safe operation.
•
Small size, high power density.
•
Convenient and fast to use, plug and play.
•
Metal design provides for good heat dissipation.
•
LED display visualizes the charging power from 25%-100%.
•
Short circuit, over current and over temperature protection make the charger safe and reliable.
•
Do not place the charger on an unstable cart, stand or table. If the charger falls, it could be
damaged!
•
Do not disassemble the charger, take it to a qualified service technician when service or repair is
required. Improper assembly increases the risk of electric shock or fire.
•
Never push any object into the air-vents of the charger since dangerous voltage points can be
touched or parts short-circuited. Ignoring this instruction may lead to electric shock or fire.
•
Unplug the charger from the mains socket when it is out of use for a prolonged period, left
unattended or during thunderstorm. In this way, the charger is protected from lightning and
power surges.
•
Unplug the charger from the mains socket before maintenance or cleaning. Do not apply liquid or
aerosol cleaners. Use damp cloth for cleaning only and then wipe dry immediately.
•
If the charger does not operate properly, in particular with any unusual condition or escaping
smell, unplug it immediately from the mains socket and contact a qualified service technician.
